Chopping Blade - Nutribullet Triple Prep System Bedienungsanleitung

5
Place the Work Bowl Lid atop
the Work Bowl. Twist the
clockwise and line up the
arrows to lock into place.
Insert the Food Pusher into
the Lid's Feed Chute.
NOTE: The Work Bowl Lid must be
secured to the Work Bowl after the
Work Bowl is secured to the Motor
Base for the unit to function.
7
Select and hold Pulse for
manual chopping.
42
6
Plug in the Motor Base. The
Lid Control Panel will illuminate
the food processor menu
showing preset modes. Select
Chop for toppings or mixes or
Dip for spreads and dips.
8
You can also select Low,
Medium, or High for
alternative preset processing
speeds.
9
If you need to add liquid,
Lid's Pusher Cap
turn the
clockwise to unlock and
Inner Pusher.
remove the
Pour liquid through the top
chute (do not fill beyond the
Work Bowl's
MAX line) and
Inner Pusher.
re-insert the
11
Twist the Work Bowl counter-
clockwise to unlock and
remove it from the Motor
Base.
10
When finished processing,
Blade
wait until the stops
Work
before twisting the
Bowl Lid
counter-clockwise to
unlock and remove it from the
Work Bowl.
NOTE: The Work Bowl Lid must be
unlocked from the Work Bowl in
order to remove the Work Bowl from
the Motor Base.
12
Carefully remove the

Chopping Blade

by only
touching the plastic areas.
Use a spoon or spatula to
transfer chopped ingredients
from the Work Bowl.
WARNING! Keep fingers from
the Blade's sharp edges!
43