Create Cyclone Force Pro Bedienungsanleitung Seite 9

C LEAN I N G ACCE S SO RIE S
AS SE M B LY AN D RE MOVAL OF T H E DUST C ONTA I NE R
Assembly of the dust container
1. Hold the hoover body with one hand and the dust container with
the other hand.
2. Insert part A of the hoover body into part B of the dust container
and snap it into place.
Removal of the dust container
1. Hold the hoover firmly.
2. Press the dust container release button and once released, the
dust container can be removed.
WA L L-MOUN TE D CH ARGI NG B R ACKE T
1. Drill the hole in the wall to attach the bracket.
2. Attach the bracket to the wall with the help of the fixing screw.
3. Once the wall bracket is correctly installed, the hoover can be hung on the wall.
Warning:
• Make sure that there are no electrical wires, water or gas pipes behind the area where you
want to install the wall mount.
• To prevent the base from falling, make sure it is installed correctly.
E NGLI SH
9