Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before starting to use the hoover make sure that:
• The battery is fully charged and correctly in place.
• The dust container and filter are clean, completely dry and in place.
1. Press the power button and the hoover will start working. Press the button
again to switch off the appliance.
2. The display will automatically show the remaining running time within 2 to
5 seconds after the power is turned on.
3. Touch the speed adjustment button and the mode display will indicate a colour according
to the suction speed, red indicates high speed, blue indicates medium speed and green
indicates low speed.
• When the hoover starts running it is on medium
speed, touch the speed button to switch to high
speed, touch again to switch to low speed.
• Long press and hold the speed button and it will
enter automatic mode.
C O NTROL PAN E L I NDICATO RS
• When the vacuum roller is blocked, the LED light on the floor brush will turn off and the
red indicator on the brush roller will flash.
• When the air duct or filter is blocked, the filter duct cleaning alarm will flash in low and
medium speed mode until the blockage is removed. In high speed mode, the appliance
will automatically shut down, after the alarm flashes for about 5 seconds, until the
blockage is removed.
• When the battery level is below 10%, the battery indicator will start flashing red. The
hoover should be charged as soon as possible.
LOADING ME TH ODS
You can charge the battery in 3 different ways:
1. Directly from the battery with the charging cable to the mains.
2. By connecting the charging cable with the battery placed in the hoover.
3. When the hoover is placed on the wall bracket the battery will be charged automatically if
the charging cable is connected to the wall bracket.
• When the battery is charging, the indicator light will
flash blue.
• When the battery is fully charged the lights will re-
main solid blue.
E NGL I SH
10
INSTRUCTIONS FOR USE
Werbung
