Create Cyclone Force Pro Bedienungsanleitung Seite 11

• The main unit of this hoover has a safe voltage below 36 V DC and there is no danger of
electric shock during use.
• The lithium battery of this product is equipped with charge and discharge protection.
When fully charged, the charging power will automatically cut off and the battery will
stop charging.
• This product is equipped with full air inlet blocking protection. When the air inlet of the
hoover is completely blocked, the hoover will automatically turn off.
• This product is equipped with an electric brush to remove dust. If the brush roller is jammed,
the power supply to the brush motor will be cut off and an alarm will sound.
PROBLEM
The hoover is out of battery.
The charger does not charge the
The hoover does
battery.
not work.
The security system has been activated.
The hoover needs to be repaired.
The hoover The dust container is full.
makes an
The filter is blocked.
abnormal noise.
The dust container is full.
The filter is blocked.
Suction is weak.
The hoover is running out of battery
power.
The dust container is full.
The hoover does
HEPA filter is not installed correctly or
not absorb dust.
is blocked.
The central roller
There is entanglement in the roller.
is not working.
If there are other errors or any of the above persist, please contact the after-sales service.
SECURITY SYSTEMS
PROBLEMS AND SOLUTIONS
POSSIBLE CAUSES SOLUTION
Charge the battery with the supplied
charging cable.
The charger is not working properly.
Please contact the after-sales service.
Remove the obstacles and wait a few
minutes.
Please contact the after-sales service.
Empty the dust container.
Clean and/or replace the dust filter.
Empty the dust container.
Clean and/or replace the dust filter.
Charge the battery with the supplied
charging cable.
Empty the dust container.
Fit the filter correctly. Clean and/or
replace the dust filter.
Clean and untangle the roller.
E NGLI SH
11