Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.8 Specific danger
When adjusting the height of the frame there is danger of injury. Make sure that there is no-one
−
else in the immediate surroundings of the frame.
When assembling the workstation frame, make sure there is ample space to avoid collisions
−
(i.e. inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable
directions.
Make sure there is ample space to avoid collisions if there are objects on the work surface such
−
as computers or computer peripherals.
Make sure there is clearance of at least 25 mm from all other furniture, all around the
−
workstation frame.
2.9 In an emergency
Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
−
Have the workstation frame repaired by specialists. Refrain from using the workstation frame
−
until it has been successfully repaired.
2.10 Maintenance and upkeep
Do not perform any repairs on the work surface or other components yourself.
−
Do not alter the construction of the work surface or its frame.
−
Any faulty components removed must be replaced with new, original components from the
−
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this Assembly/operating manual.
2.11 Cleaning
Dust the table once a week with a dry cloth.
−
Clean the table with a damp cloth and a weak solution of cleaner once a fortnight.
−
2.12 Persistent risks
This table has been built to the state of the art and to recognized safety regulations. Nonetheless, it's
use may constitute a risk to the health and safety of users or third parties, damage to the table or to
other items. The table must be used only:
For the purpose for which it was intended.
−
If it is completely safe to do so.
−
ACTIFORCE MECHATRONICS TECHNOLOGY SDN. BHD.
ONCE PRINTED CONSIDER REFERENCE ONLY
(Not subject for revision change)
EN
7
Werbung
