Safety Lock - Whirlpool Wmw47Hmb Bedienungsanleitung

. MANUAL FUNCTIONS
After having selected the function you require, you
can change its settings.
The display will show the settings that can be
changed in sequence.
MICROWAVE POWER / TEMPERATURE
When the icon flashes on the display, turn the
knob to adjust the power setting and then press
confirm and continue to alter the settings that follow
(if possible).
Please note: Once the function has been activated, the
power can be changed by pressing
settings menu, then turning the knob to change the setting.
GRILL POWER
There are three defined power levels for grilling: 1
(low), 2 (mid), 3 (high). The default value is displayed
between two flashing "- -" symbols.
Turn the knob to set the desired grill level, then press
to confirm.
DURATION
When the icon flashes on the display, use the knob
to set the cooking time you require and then press
to confirm.
You do not have to set the cooking time if you want
to manage cooking manually: Press
start the function.
Note: During cooking, you can adjust the cooking time by
turning the knob; each time you press
increases by 30 seconds.
QUICK HEAT
Select the function, then use the knob to set the
target temperature you require and press
confirm and start the function.
When the oven reaches the target temperature a
buzzer sound.
Please note: It is advisable to do not put the food into the
oven before the end of this function.
to
to access the
°C / W
to confirm and
, the cooking time
to
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
Every time the button is pressed again, the cooking
time will be increased by a further 30 seconds.
Please note: You can press
that is currently active.
. JET START
When the oven is switched off, it is possible to press
to activate cooking with the microwave function
set at full power (900 W) for 30 seconds. Each
additional press of the button
by an additional 30 seconds.

. SAFETY LOCK

This function is automatically activated to prevent the
oven from being switched on accidentally.
Open and close the door, then press
function.
4. PAUSE
To pause an active function, for example to stir or turn
the food, simply open the door.
To start it up again, close the door and press
AUTOMATIC PAUSE
(STIR OR TURN THE FOOD)
Certain functions will pause to allow you to turn or stir
the food.
Once the oven has paused cooking, open the door
and carry out the action you are prompted to perform
before closing the door again and pressing
continue with cooking.
at any time to stop the function
will increase the time
to start the
.
to