Follow these steps to log in to your camera through the Web:
1. Open your browser, input the IP address of your camera in the address bar and then press Enter
to open the login page. The default IP is 192.168.1.13.
2. Enter the default username and password (admin/admin) and then click Login.
NOTE:
1. DHCP is enabled by default. If a DHCP server is used in your network, your
camera may be assigned an IP address, and you need to use the assigned IP address to
log in.
2. You may need to install a plug-in at your rst login. Please follow the on-screen
instructions to complete the installation and then open the browser again to log in.
3. The default password is intended only for your rst login. To ensure security, please
change the password after your rst login. You are strongly recommended to set a strong
password of at least nine characters including all three elements: digits, letters and special
characters.
4. If the password has been changed, please use the new password to log in.
IPC301-5M-D
Username
admin
Password
*****
Live View
Login
Forgot Password?
Reset
13