Explore Scientific RPW3001 Bedienungsanleitung Seite 4

LCD DISPLAY
1. Weather forecast display
2. Indoor temperature display
3. Time, date and weekday display
[ ] RCC signal received
[ ] Alarm ON
[ ] Low battery indicator

[ ] Ice alert
6


GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [ ] displays, or when
the display is dim.
POWER ADAPTER
Plug the power cable to the power jack and the power
adapter provided to a suitable power outlet.
NOTE: We recommend only using a compatible Type-C
4
input adapter (3.5V 100mA) and insert batteries
as backup power source.
CLOCK
CLOCK RECEPTION
1. Replace batteries or press [ ] button to initiate
RCC receiving.
2. RCC receiving can work in both date mode and alarm
mode.
3. The receiving process takes about 7 minutes.
4. During receiving process, the
signal symbol switches between
.
5. If the RCC receiving process is successful, a completed
RCC symbol [ ] will be shown in the display and
the date and time will be set automatically. If it fails,
RCC setting will quit automatically. Press [
button to re-initiate RCC receiving.
6. RCC receiving will automatically start at 1:03, 2:03,
3:03 every night. If they failed, it would continue at
4:03 and 5:03. Auto receiving function will start at next
1:03 if all failed.
7. To stop RCC reception, press the [ ] button.
8. If the device is still not receiving the signal, please
EN
IT
DE
FR
ES
RCC
]
7