Advanced Bionics Naida CI Q30 Bedienungsanleitung Seite 12

Using the Naída CI Q30 Sound Processor
Powering the Naída CI Q30
The processor is turned 'on' when a charged battery is attached to the processor. In
order to power 'off' the processor, the battery cartridge must be removed. When the
battery is engaged, the orange LED located in the middle of the rocker switch will
flash to indicate battery charge.
The Naída CI Q30 will always power on in Program 1 with the volume and sensitivity
at the default settings.
To power down the Naída CI, simply remove the battery cartridge.
Note: The T-Mic™ 2 cover should be replaced at regular intervals to maintain sound
quality.
10