Adjusting Brakes - SXT-Scooters 1000 Turbo Bedienungsanleitung

The Brakes on the scooter should come fully adjusted from the factory.
However, it may be necessary to adjust the brakes from time to time.
The brakes may squeak before they are broken in. This is normal and will
not affect the function or performance of the brakes. With continued use the
GENERAL

ADJUSTING BRAKES

ADJUSTING BRAKES:
To adjust the rear brakes:
1. Adjust the tension screw on the right hand
brake lever by rotating it counter-clockwise until
the wheel spins freely.
For brakes that are adjusted too tight:
2.Tighten the tension screw on the right hand
brake lever by rotating it clockwise until the wheel
has a slight drag.
For Further Front Brake Adjustment :
3.Locate the adjustment screw on the front brake
assembly (located above the front wheel). Tigh-
ten or loosen as necessary.
For Further Rear Brake Adjustment :
4. Locate the adjustment screw on the rear brake
assembly (located on the left side of the back
wheel. Tighten or loosen as necessary.
SQUEAKY BRAKES
squeak should go away.
9
instuctions sxt-scooters