Ronix RP-4100 Bedienungsanleitung Seite 37

Machine pulsating
Machine starts, but
no water comes out
Air in inlet hose
Inadequate supply of
mains water
Nozzle partially
blocked
Water filter blocked
Hose kinked
Pump/hoses
or accessory frozen
No water supply
Water filter blocked /
Nozzle blocked
Allow machine to run with open
trigger until regular working
pressure resumes.
Check that the water supply
corresponds to specifications
required
NB! Avoid using long, thin hoses
(min. 1/2").Clean the nozzle /Clean
the filter
Straighten out hose.
Wait for pump/hoses or accessory
to thaw. Connect inlet water.
Clean the filter /Clean the nozzle
User Manual
|
3 5