High Pressure Hose; Clean The Sieve In The Water Connection - Ronix Rp-4100 Bedienungsanleitung

HIGH PRESSURE HOSE

The high pressure hose is specially constructed with reinforced walls it
can be easily damaged and should be stored carefully.
- Do not kink.
- Do not drive vehicles over the hose.
- Do not expose the hose to sharp edges or corners. Misuse will lead to
ballooning or premature failure and will invalidate warranty.

CLEAN THE SIEVE IN THE WATER CONNECTION

Clean the sieve in the water connection regularly.
Remove coupling from the water connection, and rinse with warm water
to prevent any foreign matter from clogging the pump.
Clean the nozzle with the needle clean-out tool provided. Remove the
spray wand from the gun. Remove any dirt from the nozzle hole and rinse.
ATTENTION
- The sieve must not be damaged.
- Pull the sieve out using flat pliers.
- Clean the sieve under running water.
- Reinsert the sieve into the water connection.
CLEAN THE DUST BAG
pressure the locking block, then push front to open the dust compartment.
Take up the dust compartment.Pressure the automatic release button to
empty the dust into dust container.
|
3 3
User Manual