Ronix RP-4100 Bedienungsanleitung Seite 30

CAUTION
Make sure the on/off switch is set to "OFF" and insert the plug into a
properly installed socket.
ATTENTION
- The washer must be used on a secure and stable surface in a standing,
upright position.
Connect the product to power and water supply as described.
- Open the water supply
- Hold the spray gun with both hands.
- Direct the nozzle of the chosen accessory away from you towards the
surface to be cleaned.
- Unlock the trigger and press it until a constant amount of water flows
through the nozzle, to allow air trapped in the hose to escape.
- Release the trigger.
- Turn on the switch
- Hold the spray gun with both hands. Direct the water jet to the object
to be cleaned and press the trigger.
Release the lever of the trigger gun; the device will switch off again and
stop the water jet. High pressure remains in the system.
WARNING!
Beware of kickback when pressing the trigger!
OPERATION WITH DETERGENT
Detergent can only be added when the device is operated in low pressure mode.
|
28
Multi-Functional High Pressure Washer (4in1) 130bar