Tomahawk COACH BY COLOR COMPUTER Bedienungsanleitung Seite 39

IN DISPLAY 1, AN "E" IS ALWAYS SHOWN IN THE LEVEL DISPLAY.
IN DISPLAY 1, AN "E" IS ALWAYS SHOWN IN THE WATT DISPLAY.
WHEN I CARRY OUT THE OFFSET MEASUREMENT, THE FOLLOWING SCREEN APPEARS.
FAQ
In this case, the computer isn't receiving any data from the brake sensor.
Contact servicing if this is the case.
In this case, the computer isn't receiving any data from the power
sensor.
Contact servicing if this is the case.
In this case, there is an error with the electronics.
Please go to the SETUP > SYSTEM CHECK menu and note down the
displayed error codes (ERROR #).
Then contact servicing and provide them with the displayed error
codes (ERROR #).
39