Kin BKL Serie Gebrauchsanleitung Seite 5

BKL Series
GB
1. Safety Measures
Before starting the pump, read this instruction booklet carefully and keep it
in a safe place for future reference. The pump must only be used for the
purpose for which it was designed. For safety reasons the pump must not
be used by anyone under the age of 16 or by anyone who has not read and
understood the present instructions booklet.
The power cord and floating switch must never be used to carry or move
the pump. Always use the pump's handle.
When handling the pump, while it is connected to the electric power
supply, you should avoid all contact with water.
Never remove the plug by pulling on the power cord.
Before taking any action on the pump, always remove the plug from the
power socket.
If the power supply cord has been damaged, it must be replaced by the
manufacturer or its authorized customer support service in order to avoid
all risks.
The pump is equipped with a thermal overload safety device. In the event
of any overheating of the motor, this device automatically switches off the
pump. The cooling time is roughly 15 to 20 minutes, then the pump
automatically comes on again. If the overload cutout is tripped, it is
essential to identify and deal with the cause of the overheating. See chapter
Troubleshooting.
5
kinpumps.com