Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To take pictures
in P-mode TTL,
compose
and focus
on subject
P-mode flash range (p. 6). X-700's flash
program
automatically
making this mode ideal for general flash
photography.
To take pictures in Anode
at desired aperture,
making sure subject
is
within
corresponding
NOTES
ra, At other apertures, viewfinder
Audible slow-shutter-speed warning, if beeping, will Stop. X-700's viewfinder
•'A" goes out.
'c If flash is not charged, photo is taken at existing settings without flash.
•d] FDC (Flash Distance Check) signals indicate if exposure was sufficient (but
also come on even when subject
graph on back foldout for minimum distances).
simply
within
selects aperture,
T T L, set lens
flash
range
Ex: at f/2,
(at ISO • ASA
"P" blinks as warning.
was too close and thus overexposed
Is flash charged (p.
0 15 30
5
approx.
15m
or
100)
Take
picture.
automatically
1 /60 sec.) •e
50
ft.
Was exposure sufficient?
If so, 1/60
times/sec.
for
flash's
green FDC
glows for 2 sec. If not: in
P-mode TTL, move closer
— see
or
switch
TTL;
in
A-mode
use larger aperture and/or
move
closer.
(Shutter
releases at
LED
blinks
8
1 sec. and
lamp
to
A-mode
TTL,
'd)
Werbung
