DO NOT use the Solar Panel Charger and the AC transformer at the same
CAUTION
time. Doing so may damage your control board
Check polarity before making a connection. Reversing polarity may damage
CAUTION
your gate opener system
If you do not see aforementioned
refer to the user manual of your gate opener system for instructions
NOTE
wiring the control board
6
If your gate opener system requires 12VDC power to operate, you may connect multiple
IOW Solar Panel Chargers (A) in parallel for additional daily gate cycles.
7
If your gate opener system requires 24VDC power to operate, you will need to connect
two IOW Solar Panel Chargers (A) in series to meet the vo tage requirement
opener system. For additional daily gate cycles, you may connect multiple two Solar
Panel Charger strings in parallel
All connections
CAUTION
kits
• Clean the glass surface Of the Solar Panel Charger as necessary. Please use water and
a soft sponge or cloth for cleaning. A mild, non-abrasive cleaning agent can be used to
remove grime and dirt
• Check the electrical and mechanical connections every six months to verify that they are
clean, secure and undamaged
• If any problem arises, have them investigated
maintenance instructions for all components used in the system
terminals on your control board, please
should be made weatherproof
MAINTENANCE
by a competent specialist
08
using weatherproof
Observe the
on
of gate
splice