Werbung
Verfügbare Sprachen
Verfügbare Sprachen
17. If a ladder is delivered with
A
stabilizer bars and these bars should
be fixed by the user before the first
use this shall be described on the
ladder and in the user instruction
B
20. Leaning ladders with rungs shall
be used at the correct angle
22. Ladders used for access to a
higher level shall be extended at least
1 m above the landing point and
secured, if necessary
24. Do not lean the ladder against
unsuitable surfaces
26. All locking mechanisms for all
extended rungs/steps shall be
checked and be locked before use
T1. For Germany TRBS 2121:
At steps with a minimum depth
of 80mm, work is allowed without
2-5 m
restrictions up to standing height of
≥ ≥ 80 mm
2m. Standing height between 2 to 5m
0-2 m
allows temporary work up to 2h.
•
Ladders should only be used for light work of short duration (tiredness is a risk).
•
Do not use the ladder outside in adverse weather conditions, such as strong wind.
•
When positioning the ladder take into account risk of collision with the ladder e.g. from pedestrians,
vehicles or doors. Secure doors (not fire exits) and windows where possible in the work area.
•
Use non-conductive ladders for unavoidable electrical work.
•
Do not modify the ladder design.
•
Do not move a ladder while standing on it.
18. Ladder for domestic use
19. Ladder for professional use
21. Leaning ladders with steps shall
be used that the steps are in a
horizontal position
23. Only use the ladder in the
direction as indicated, only if
necessary due to design of ladder
25. Do not stand on the last meter of
a telescopic ladder
27. Do not bring your hands/fingers in
rungarea when bringing the ladder in
to its possible positions of use
T2. Follow strictly the recommenda-
tion of a yearly inspection to create a
repetitive routine and review the
condition of the product. More
+1Y
information can be found in the
Telesteps Maintenance Program.
EN
Werbung
