Sharp FN4EA Bedienungsanleitung Seite 11

buttons being pressed on the set or remote control before going into
standby.
CI Card
To get to the Live TV menu, press the SOURCE button and select one of
available inputs. Then press the MENU button.
Pay per view services require a "smartcard" to be inserted into the TV. If
you subscribe to a pay per view service the provider will issue you with a
'CAM' and a "smartcard". The CAM can then be inserted into the COMMON
INTERFACE PORT (CI Card In). This menu allows you to view information
and change settings of CAM.
Advanced Options
To get to the Live TV menu, press the SOURCE button and select one of
available inputs. Then press the MENU button.
Various settings for Live TV.
Available options
[Sound Tracks]
Allows you to choose between the audio channels being transmitted on
Digital Television.
[Blue Mute]
Changes the background colour to blue when there is no input signal.
[Default Channel]
Allows you to choose default Digital TV channel, which will be displayed
after TV is powered on.
[HBBTV Settings]
Allows the user to switch HbbTV on/off . To use HbbTV, TV must be
connected to the internet and watched channel must support HbbTV
service.
[Subtitle]
Select your preferred subtitle language and type.
[Teletext]
Select language for teletext.
[OAD]
Allows you to set automatic software upgrade via OAD (On Air Download)
on/off .
[System Information]
Allows you to view signal frequency, signal quality and signal strength of
current Digital TV channel.
[Version Info]
Information about TV software version.
Settings menu
Network & Internet
To get to the Settings menu, press the HOME button, then select [Settings].
Available options
[Wi-Fi]
Allows you to enable/disable built-in WiFi.
[See all]
Shows full list of available wireless networks.
[Add new network]
Allows you to add Wi-Fi network manually. This is needed in case you set
up on your router invisible/hidden wireless network.
[Scanning always available]
Some location apps need to periodically scan other Wi-Fi devices in the
area. This function allows to scan Wi-Fi devices even in case Wi-Fi is turned
off .
[Wow]
Allows the set to turn on via network control wirelessly.
[Wol]
Allows the set to turn on via network control over LAN connection.
[Proxy Settings]
Confi gure proxy server for web browser.
[IP settings]
Confi gure wired network.
Channel
To get to the Settings menu, press the HOME button, then select [Settings].
Confi gures the settings related to receiving broadcast programming.
Available options
[Channels] (Antenna mode)
[Channel Scan]
Allows you to retune the television for all digital and analogue channels.
[Update Scan]
Tunes all frequencies, on which there are currently not tuned any channels.
It is recommended when searching new channels which were added
recently, without retuning all channels.
[Analog Manual Scan]
Direct tuning of analogue stations.
[Single RF Scan]
Allows you to manually tune your digital signal by selecting the channel
number.
[Manual Service Update]
Channel positions, names and frequencies will be updated by the provider.
[LCN]
Logical Channel Number. When turned on, digital stations will be ordered
according to provider preferences.
[Channel Scan Type]
Settings for [Channel Scan]. You can select what type of channels should
be tuned: Only encrypted channels, only free channels, or all channels.
[Channel Store Type]
Settings for [Channel Scan]. You can select what type of channels should
be stored after tuning fi nish: Only digital TV channels, only radio channels,
or all channels.
[Favorite Network Select]
In some countries/areas may be available more networks. Channels will be
ordered diff erently according to selected network.
[Channel Skip]
Allows you to choose channels, which will be skipped when pressing CH+ /
CH- buttons on the remote.
[Channel Sort]
Allows you to swap position of two channels between each other.
[Channel Move]
Allows you to move selected channel to new position.
[Channel Edit]
Allows you to delete channels from the channel list.
[Analog Channel Fine-tune]
Allows you to fi ne-tune analogue channels to adjust picture quality.
[Channels] (Cable mode)
[Channel Scan]
Allows you to retune the television for all digital and analogue channels.
[Single RF Scan]
Allows you to manually tune your digital signal by selecting the channel
number.
[LCN]
Logical Channel Number. When turned on, digital stations will be ordered
according to provider preferences.
[Channel Scan Type]
Settings for [Channel Scan]. You can select what type of channels should
be tuned: Only encrypted channels, only free channels, or all channels.
[Channel Store Type]
Settings for [Channel Scan]. You can select what type of channels should
be stored after tuning fi nish: Only digital TV channels, only radio channels,
or all channels.
[Channel Skip]
Allows you to choose channels, which will be skipped when pressing CH+ /
CH- buttons on the remote.
[Channel Sort]
Allows you to swap position of two channels between each other.
[Channel Move]
Allows you to move selected channel to new position.
[Channel Edit]
Allows you to delete channels from the channel list.
[Analog Channel Fine-tune]
Allows you to fi ne-tune analogue channels to adjust picture quality.
[Channels] (Satellite mode)
[Satellite Re-Scan]
Allows you to scan selected satellite.
[Satellite Add]
Allows you to add new Satellite into the list of satellites.
[Satellite Update]
Tunes all frequencies, on which there are currently not tuned any satellite
channels.
EN EN