Pepperl+Fuchs ecom Loc-Ex 01 Betriebsanleitung Seite 4

Verfügbare Sprachen

1. Advertising parameters

Advertising interval:

Signal level:

Name:

2. Commissioning

The supplied batteries must be inserted to begin with (outside the Ex-area). There-

fore the safety rubber band has to be removed from the beacon first. Now the top

housing can be taken off and the supplied type approved batteries can be inser-

ted. Afterwards the top and bottom housing can be screwed together. The housing

screws are supplied in a little plastic bag (enclosed in the bottom housing).

In order to be able to use the Loc-Ex

bottom and the top housing are screwed together tightly.

Once the batteries are inserted the device automatically begins to transmit the sig-

nal with the factory settings. The beacon is supplied with standard software.

3. Software-parameterization

The additional manual for "How to use the software / app" can be downloaded from

the relevant product page at www.ecom-ex.com

4. Disposal

Old electrical devices by ECOM Instruments GmbH or Pepperl+Fuchs SE will

be directed to disposal at our expense and disposed of free of charge in accordance

with European Directive 2012/19/EC. Please follow local regulations for the

disposal of electronic products. The costs associated with returning devices to

ECOM Instruments GmbH or Pepperl+Fuchs SE are to be borne by the sender.

Old electrical devices should not be disposed of along with normal or household

waste.

Dispose of batteries in accordance with European Directive 2006/66/EC.

Batteries should not be disposed of with normal or household waste. Disposal can

be done via appropriate collection points in your country.

Note: The battery used in this unit poses a fire hazard and can cause chemical injuries

if it is used improperly. Neither the battery nor the battery cells should be opened or

disassembled and they should not be burned or exposed to temperatures exceeding

55 °C. The disposal regulations specified above are also applicable for old devices.

500ms

8dBm

LOC

01 in the Ex-area it must be ensured that the