How To Use; (I) Dry Mill - Panasonic MK-F500 Bedienungsanleitung

DRY MILL
Ingredient Preparations for Dry Mill
Function Ingredient
Coffee Bean
Grind
Pepper
How to Use: Dry Mill
1
Maximum
Level for Dry
Ingredients
Turn the Mill Container upside down and fill in the
ingredients without exceeding the maximum level
indicated. Place the Mill Container Base into the Mill
Container and turn it clockwise until a 'click' sound is
heard.
Make sure the ribs on outer surface of the Mill container
base and inner surface of the Mill container are hooked
firmly.
3

After the processing is completed, return the Rotary
Switch to OFF position "0" and unplug from the socket.
Remove the Dry Mill Unit from the Motor Housing and
proceed to remove the ingredients.
Note:
• While removing the ingredients, be careful of the Cutting Blade.
• Do not operate exceeding the rated operation duration (1 min ON, 2 min OFF).
• Prohibited ingredients: refer to page GB6.
• Do not operate the unit with empty Dry Mill.
• Do not fill exceeding the maximum level and reduce ingredients when the appliance makes an abnormal sound
or vibrates during operation.
100_160419_MK-F500_Second_EU(UZ50G155).indb
Max
Speed Operating Time (approx.)
Single Use
Till
2
Max Level





19
~ 60 sec
2


Attach the Dry Mill Unit onto the Motor Housing. Turn
the Dry Mill Unit clockwise until a 'click' sound is heard.
Plug-in the plug into the socket and turn the Rotary
Switch to select the speed required.
4

Turn the Mill Container Base anticlockwise to unlock
and lift up from the Mill Container.
Preparation Method
-



GB19
2016/04/19 16:58:38