Safety Lock; Disassembly - Panasonic MK-F500 Bedienungsanleitung

SAFETY LOCK

The Safety Pin is designed to prevent the appliance from switching on when
- The Bowl Lid or Citrus Strainer and the Bowl are not fully locked to each other.
- The Bowl, Blender Jug or Mill Container are not fully locked to the Motor Housing.
Note:
• Do not push the Safety Pin and Safety Lever with any instrument, stick etc.
• Do not pour liquids or ingredient at the Safety Pin and Safety Lever area.
• Keep the Safety Pin and Safety Lever area clean to avoid foreign particles accumulate on the area.
Actions above will ensure the Safety Pin and Safety Lever function properly. If not followed, it will
damage the parts related to the Safety Pin and Safety Lever.

DISASSEMBLY

Disassembly from Packaged Condition
1


Rotate the Bowl Lid anticlockwise and lift up from the
Bowl.
Note:
Beware of the sharp edges of the Knife Blade when removing it from the Bowl.
GB10
100_160419_MK-F500_Second_EU(UZ50G155).indb
Safety Pins
10
The Safety Lever only
activates the Safety Pin
if the Bowl Lid or Citrus
Strainer is secured on the
Bowl.
Position A : Unlock
Position B : Lock


Fully locking steps :
For Bowl and Blender Jug, align the
triangle mark with the Motor Housing as
shown in position A. Turn it clockwise
until a 'click' sound is heard and the
triangular mark now aligns to position .
For Dry Mill, place onto Motor Housing
and turn clockwise until a 'click' sound is
heard. To unlock, follow the locking steps
in reverse.
2
Top of the
Knife Blade
Hold the top of the Knife Blade and lift up to remove
from Bowl.
2016/04/19 16:58:35