First, loosen the screw. Then hold the handle of the honey outlet connector,
lift it to open the honey outlet, and let the honey flow out.
TROUBLESHOOTING INSTRUCTION
Problem
The motor does not
start after the
power is turned on
Barrel shaking
CLEAN,CARE AND STORAGE RULES
Reason
The plug is not tightly
plugged in
The switch is not
turned to 1
The speed control
knob is not adjusted
The frames are not
placed symmetrically
The feet are not fixed
on the ground
- 8 -
Solutions
Insert the plug firmly
Turn the switch to 1
Adjust the control knob
Place the frames
symmetrically
Fix the feet on the
ground