VEVOR HE-15C-24E-EU Bedienungsanleitung Seite 7

Step 2: Installation of the Honey Valve.
First, erect the barrel and unscrew the honey outlet connector. Then, put the honey
outlet at the corresponding outlet outside the barrel. Finally, put the plastic nut into
the barrel, connect it with the honey outlet connector, and tighten it.
Step 3: Installation of Honey Extractor Lid.
Assemble the two lids with screws.
Step 4: Put the beehive frames of different sizes with honey into
the corresponding frames in the barrel.
Step 5: Connect the power cord to the electrical port to power the
honey extractor.
- 6 -