Identifying Controls - Panasonic TY-TP10E Bedienungsanleitung

Identifying Controls

Pen tip
Power button
Press the button once to turn the power on. Pressing the
button approx. 2 seconds or longer while the power is on will
turn the power off.
This is also used when registering the Touch Pen on the
television. For details on registration, refer to the Registration
page. ( page 8)
The Touch Pen automatically turns off if touching or drawing
operation is not performed for 5 minutes.
Indicator lamp
Lights or fl ashes while using or charging to indicate the status
of battery level and Touch Pen.
• Lights for approx. 2 seconds when turned on, and then
blinks at approx 2-second intervals.
Up to two Touch Pen can be used. The indicator blinks
in red with Touch Pen 1 operation, and green with Touch
Pen 2 operation.
• Also lights or blinks when registering the Touch Pen to the
TV.
For registration, see "Registration". (
• Blinks 5 times consecutively at power-on when the battery
level is low.
Pen tip
Press the pen tip on this side of the Touch Pen against the
screen for use.
Wrong use may cause scratch of the screen.
Unit cover
See "Inserting the battery" page. (
6
Unit cover
Indicator lamp
Power button
page 8)
page 7)