cecotec BIGDRY 2000 ESSENTIAL Bedienungsanleitung Seite 29

1. PARTS AND COMPONENTS
Fig. 1
1. Power switch
2. Power light indicator
3. Air inlet
4. Air outlet
5. Power socket
6. Water tank
7. Tank level sensor
8. Water outlet
9. Power adapter
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Always keep the dehumidifier upright to avoid leaks.
- When installing the device, ensure a minimum safety distance of 30 cm to each of its sides.
3. OPERATION
1. Connect the device to the power adapter and the latter to a power outlet.
2. Press the power button (1) to turn on the device: the power LED indicator will light up
blue. Fig. 2
3. Press the power button (1) again to turn off the device: the power indicator will turn off.
ENGLISH
BIGDRY 2000 ESSENTIAL
29