EN
3. INSTALLATION
The ceiling unit can be built into plates with
a thickness of 18-35mm. Do not mount
directly into gypsum board; always make
sure there is reinforcement for the tightening
of the mounting clamps. Make sure there
is a socket near the ceiling unit, so that the
power may, at all times, be removed from
the ceiling unit.
Because of the substantial own weight of
the hood, the ceiling must have sufficient
load bearing capacity.
The recommended mounting height for an
electric or ceramic cooking plate is min. 600
mm and max. 1600 mm. The mounting height
for a gas or induction cooking plate is min.
650 mm and max. 1600 mm.
– 71 –