PROJECT E BEAUTY SmoothPro+ Bedienungsanleitung Seite 29

Press the flash
7.
see a bright flash and hear a popping noise; then
you may feel a mild stinging or heat sensation.
Let go of the flash button after the appliance has
8.
flashed.
For the next flash, repeat steps 6 to 9. After each
9.
flash, it takes up to 3 seconds until the appliance is
ready to flash again.
10. Slowly move the area for hair removal, avoiding
going over the same spot more than once. This
does not improve the effectiveness of the
treatment,
How
button
but increases the risk of skin reactions.
to Use
to release a flash. You will
29