PROJECT E BEAUTY SmoothPro+ Bedienungsanleitung Seite 22

Recommended
In order to determine if you have a Light Sensitivity
Issue please follow the instructions below. It is
recommended that you test a small, less sensitive area
of skin (i.e., like your forearm).
Pressthe power button to turn on the device. (refer
1.
to p. 26-29)
Place the skin tone sensor window closely against
2.
the skin. The power light should change from
green and red alternating lights into a solid red
light, meaning that the skin type is appropriate for
hair removal.
Place the device
3.
the lowest level and deliver a pulse on the selected
test skin area.
If you feel comfortable with the treatment level,
4.
increase it to Level 2 and perform an additional
pulse on the next spot.
Only if you feel comfortable, you may continue to
5.
reach Level 3, Level 4, or the maximum treatment
level of 5.
Wait 24 hours. You should NOT experience any
6.
adverse reaction during the next 24 hours. A bad
reaction to light occurs if you have pain or
discomfort in the treatment areas or any skin
redness
medication, supplements, or a possible skin issue.
22
Light Sensitivity
Before
on an area of the forearm.
for more than
Test
Use
two hours.
Select
It can be due to