Explanation Of Controls - Project E Beauty Smoothpro+ Bedienungsanleitung

SmoothPro+
Indications:
Power button used for device activation,
1.
deactivation, and energy selection.
• Pressing the button (after the device is
connected to the power supply) will turn on the
device at energy Level 1. Pressagain to change
the energy, from the lower level to the higher, for
a total of 5 different energy levels.
• The device will switch to standby mode when
left unattended or by pressing the Power button
for 3 seconds.
2. Flash Button (flash pulse activation) marked on
about 1/3 up the unit.
• The flash button will activate the flash lamp if the
treatment
and the skin tone is within the allowed range.
Pressing the button once will activate a single
pulse, moving the device about half the distance
of the
Explanation
Activation
window
window each
of Controls
Buttons and
is in full contact
time.
Status
with the skin
19