UGREEN NASync DXP2800 Benutzerhandbuch Seite 9

4. Reinstall the tray and power on the NAS. After successful boot up, go to the "UGREEN NAS" app to
set the SSD cache.
01
AWarning
To avoid data loss, please remove the SSD cache in the "UGREEN NAS" before
removing any M.2 SSD. This will provide added protection
using it for caching.
02
in case the system is
Powering On
Use Ethernet cable to connect NAS to a LAN port on a router. Connect the power adapter to the device,
then short press the power button to turn it on
ips: After powering on, you can download "UGREEN NAS' then go to "Control Panel" > "Hardware &
Power" to select automatic startup after powering
HDMI LJSB3.2
O
LAN
AWarning
To avoid potential fires, explosions,
use non-Ugreen power adapters or uncertified
on.
usu.o
E]
12V
O
Included
adapter
(DC 12V/5A)
or other electrical hazards, please do NOT
power adapters.
power
12