UGREEN NASync DXP2800 Benutzerhandbuch Seite 11

Phones/ Tablets & Other Devices—Binding
I. Application Download
Option 1: Scan the QR code below or the QR code on the device using your phone to install the
"UGREEN NAS" app
Option 2: Go to UGREENls official website
install the corresponding application.
Scan to instal
2. Binding & Settings
Step I: Add Device
(j) Please ensure that the NAS device and your phone or computer are on the same I-AN.
@ Open "UGREEN NAS". The system will automatically
device by scanning the QR code on the bottom
@ Select the device you want to add and click "Connect'
Step 2: Initialize the Device
(1) After adding the device, you will enter the initialization
@ In this interface, please complete the following operations:
• Name the device: Name your device to ensure
• Create a local administrator account:
manage the device
• Register and bind UGREEN Cloud account
such as UGREENlink and Quick Login. You can choose to register
and bind your device. If not, you can choose to skip this step and use only the local account
to log in to the device
(3)After completing the above operations,
the device analysis improvement plan option (not required),
Note: If the device does not undergo the initialization
"Not Initialized"
Step 3: Set up Storage Mode
Enter the "UGREEN NAS" > "Storage Manager"
configure storage space.
& Settings
(https://nas.ugreen.com/download),
search for devices. You can also add a
of the device.
settings interface
it's easy to identify and manage
Register a local administrator account for the device to
(optional): If you want to use additional
a UGREEN Cloud account
please check the update system option (required)
then you can start using the device.
process, its status will be displayed
, then you can set up storage mode and
Device Sharing
Option I (the invited
The administrator
"Add" to create a new user account,
download and
the invited user logs in to the 'IUGREEN NAS", searches
the account password
Option 2 (the invited
Firstly, the administrator
NAS", enters "Control
and copies the invitation
account information,
Note: UGREENlink
"UGREEN
network settings
Reset Network
When the NAS device
5s until you hear the buzzer beeping.
the reset is complete,
functions
is ready for use
Please note that
and
resetting, you can log in to the system with the "admin"
account is specifically
as
wizard to configure
user and NAS are on the same network):
logs in to 'IUGREEN NASI' > enters "Control
and provides the account
for the device via the LAN, then enters
to activate the account and bind the device.
user and NAS are not on the same network):
enables the UGREENlink online service, then logs in to the "UGREEN
Panel" > "User Management" > "Invite" to enable the invitation
link to the invited users. When invited
then they can apply to access the device.
online service is an external network access service
NAS" , allowing you to access the app without
& Password
is turned on, use a pin-like object to insert
The device will not restart
the solid white network indicators
the reset will not affect the data stored in the
account
utilized for password resets). Once logged
your administrator password
Panel" > "User Management" >
and password to the invited user;
settings,
users open the link, enter the
provided by
needing to adjust complicated
and hold the "RESET" hole for
during the reset process. After
will turn on, indicating that the device
hard drive After successfu
and blank password (this
in, follow the step-by-step