Nitho HEXAGON Kurzanleitung Seite 6

WIRED CONNECTION SETUP
PC
Connect the included USB data cable to HEXAGON
controller and the PC.
LIGHT EFFECTS & COLOURS SETUP
HEXAGON controller is illuminated by default.
You can turn off the light by pushing the L1 + R1 buttons for a
minimum of 5 seconds. You can switch the light back on
repeating the same procedure.
Press the "N" button with the Y or B or X or A buttons to
switch between four light effects and select one of the 8
colors:
Breathing effect
Press "N" button + X button. Then, repeatedly press the X
button to toggle between eight colours.
Fix colour effect
Press "N" button + Y button. Then, repeatedly press the Y
button to toggle between eight colours.
Colour rotation
Press "N" button + A button.Then, repeatedly press the A
button to toggle between eight colours.
Rainbow rotation
Press "N" button + B button. All eight colours will rotate
automatically.