Nitho HEXAGON Kurzanleitung Seite 5

WIRELESS CONNECTION SETUP
PC
1. Activate the Bluetooth® search mode of your PC by
clicking on "Add New Bluetooth® Device".
2. Press and hold the "N" + "CAPTURE" buttons for a few
seconds until the front LEDs starts flashing.
3. Choose "Wireless controller" and tap "Pair" on your
device/PC to connect HEXAGON.
4. The front LED bar light will stop flashing and your
controller will be connected.
IOS®, ANDROID®
1. Activate the Bluetooth® search mode of your device by
clicking on "Add New Bluetooth® Device".
2. Press and hold the "N" + "SHARE" buttons for a few
seconds until the front LEDs starts flashing.
3. Choose "Wireless controller" and tap "Pair" on your
device to connect HEXAGON.
4. The front LED bar light will stop flashing and your
controller will be connected.
NINTENDO SWITCH®
1. Press on " Controllers" > " Change Grip/Order".
2. Press and hold the "N" + "TURBO" buttons for a few
seconds until the front LEDs starts flashing.
3. Press and hold the Shoulder buttons L1 and R1.
4. The front LED bar light will stop flashing and your
controller will be connected.