Chefman ICEMAN Benutzerhandbuch Seite 17

CLEANING AND MAINTENANCE
HOW TO USE THE SELF-CLEANING FEATURE
The ice maker is equipped with a self-cleaning feature to ensure easy and complete
sanitation; this feature should be used at least once per week.
1.
To activate self-cleaning, the ice maker must be in standby mode. Enter standby mode
by doing one of the following: (1) If the ice maker is unplugged, plug in the unit; the
LARGE indicator light will blink and the ICE indicator light will be off, indicating that the
unit is in standby mode. (2) If the ice maker is plugged in and on (or in the middle of) an
ice-making cycle, press START-STOP and the ICE indicator light will turn off. This means
the ice maker has entered standby mode.
2.
If necessary, remove any ice and empty the water reservoir by pulling out the drain plug.
Replace the drain plug, pushing it in firmly to ensure it is closed properly.
3.
Fill the water reservoir to the MAX line with clean water.
4.
Press the SELECT button until the CLEAN light blinks, then press START-STOP. The
CLEAN light will turn solid and the self-cleaning cycle will begin. The cleaning function
runs for 6–8 minutes.
5.
Empty the water reservoir by pulling out the drain plug. Follow the instructions to
begin making ice, or dry completely for storage.
17