Connection And Operation - Inakustik Switch 4 Bedienungsanleitung

USER MANUAL
5.0

CONNECTION AND OPERATION

5.1 CONNECTION
1) Connect HDMI input of the product to source devices.
2) Connect HDMI output of the product to HDTV.
3) Connect audio port to Amplifier Receiver.
4) Connect Ethernet port to PC
5) Insert the DC side of 5V power supply into the unit and then connect the AC side of the power
supply into the wall outlet.
6) Turn on the power.
Attention: Insert / Extract cable gently.
5.2 OPERATION
1) Source Select
Press "Select" button or remote control to switch Input sources from Input1 to Input4 manually.
2) 2CH/5.1CH Audio Output Select
Note Only when the source supports 5.1CH output (including CD), this function is effective and it
realizes through the 2.1CH and 5.1CH buttons on the remote control.
Press "2CH" button, the product outputs 2CH audio and the LED turns off; press "5.1CH" button,
the product outputs 5.1CH audio and the LED turns on. When provided with power, it
automatically selects 5.1CH audio output.
If the source can only supports 2CH audio output, the "5.1CH" button will become invalid, that is
to say, although you press "5.1CH" button, the product still outputs 2CH audio and the LED is still
on.
3 ARC ON/OFF
When selecting ARC ON, audio output is from HDTV with ARC.
When selecting ARC OFF, audio output is from Source device.
12