Inakustik Switch 4 Bedienungsanleitung Seite 11

FRONT
7) HDMI Input
Connect this port to a source device
8) Ethernet
Connect this port to PC. When HDTV with HEC enables HEC function, PC will be connected to
Ethernet.
9) Power LED
When the switching is working, LED turns blue; when it is standby, LED turns red;
10) IR
Receive the signal from Infrared Remote Control.
11-14) Input LED
LED will turn on when input port is selected.
15) 2CH/5.1CH LED
LED will turn on when 5.1CH button is pressed; LED will turn off when 2CH button is pressed.
16) Select
Press this button to select 4 inputs circularly.
17) ARC ON/OFF LED
LED will turn on when ARC ON button is pressed, then this product will enable ARC function, and
audio signal will be from HDTV; LED will turn off when ARC OFF button is pressed, then ARC
function will be turned off, and audio signal will be from source devices.
18) Select
Press this button to select ARC on or off.
USER MANUAL
11