Connection And Operation; Connection Diagram - Inakustik 00424505 Bedienungsanleitung

5.0

CONNECTION AND OPERATION

1) Connect the HDMI input sources and MHL source into the unit. (Input cables are optional)
2) Insert the DC side of 5V power supply into the unit and then connect the AC side of the power
supply into the wall outlet.
3) Turn on the power.
Attention: Insert /extract cable gently.
5.1

CONNECTION DIAGRAM

MHL source
NOTE
Batteries must be placed in empty state at the collection points.
In addition to precautions take care against short circuits (e.g. by isolating the pole with tape).
Simplified EU declaration of conformity
Hereby, in-akustik GmbH & Co. KG declares that this device is in compliance with directive low voltage
2006/95/EG; EMV 2004/108/EG and RoHS 2011/65/EU. The full text of the EU declaration of conformity is
available at the following internet address: www.in-akustik.com
MISC
Indication without guarantee. All product images similar. We reserve the right to make changes.
HDMI sources
Power Supply
USER MANUAL
HDTV
09