Keychron K10 Pro Benutzerhandbuch Seite 5

The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the key. If the
VIA software cannot recognize your keyboard, please reach out to our support to get the
instructions. (VIA only works when the keyboard is connected by wire to the computer.)
The Layers
There are four layers of the
key settings on the
keyboard. The layer 0 and
layer 1 are for the Mac
system. The layer 2 and
layer 2 are for the Windows
The Backlight
If your system toggle is
switched to Mac, then the
layer 0 will be activated.
Press fn + Q to change the lighting effect
If your system toggle is
switched to Windows, then
activated. Remember that if
you are using it in Windows
changes to the layer 2
instead of the top layer (the
layer 0). This is a common
mistake people are making.
5
the layer 2 will be
mode, please make