FS UMC-GA1F1T Schnellstartanleitung Seite 8

LEDs
TP1/LNK
TP2/LNK
FX/LNK
PWR
NOTE:
all bright or blinking at the same time. The LED color
resembles orange.
UMC-GA1SC1T-MM/UMC-GA1SC1T-SM
State Description
Green TP1 port is operating at 1000M.
Red TP1 port is operating at 100M.
Dual
1
TP1 port is operating at 10M.
Color
TP2 port is operating at 1000M.
Green
Red TP2 port is operating at 100M.
Dual
1
TP2 port is operating at 10M.
Color
Link through the ber port is
successfully established, but no data
Green
transmission.
Blinking The ber port is actively sending or
Green receiving data.
O The ber port is linked down.
Green The device is powered on.
Dual color: Two LED chips (in one package) are
1
TP/LNK SPD FX/LNK PWR
EN 7