Coltech RP120W Original Bedienungsanleitung Seite 3

Positioning the floodlight
Consider the following advice:
• Do not mount the light on vibrating surfaces, halogen bulbs are sensitive to knocks
and vibrations.
• The best height to mount the light is 1.8–2.5 m above the detection zone (Fig. 1A).
• Do not point the sensor at the sun.
• To avoid the light coming on
unnecessarily, do not aim
the sensor towards heat sources such
as BBQ's, AC units, other outdoor
lighting, car headlights or sources of
electromagnetic interference such as
transformers.
• Do not aim the sensor at reflective
surfaces such as white walls or
swimming pools. The floodlight's
detection zone (max.12 m at 180°)
can vary depending on how high and
where it is positioned. Changes in
temperature can affect the range of
the sensor.
• Before positioning the floodlight, bear in mind that movement
across the detection zone will be detected before motion
towards or away from the sensor. (Fig.1B,C).
Fig. 1B Fig. 1C
3
Fig.1A