SPL P8 Bedienungsanleitung Seite 8

P8 – Manual
Specifications
Analog inputs & outputs; XLR & DB25 (balanced)
Maximum input gain (Mic, +8 dB to +62 dB)
Input impedance (Mic/Line)
Output impedance
Frequency range
Equivalent Input Noise (EIN)
Noise (A-weighted, Mic Preamp, 150 Ω, 30 dB Gain)
Rausc (A-weighted, Mic Preamp, 150 Ω, 62 dB Gain)
Common mode rejection (1 kHz)
THD+N Ratio (1 kHz), Mic 30 dB Gain
THD+N Ratio (1 kHz), Mic 62 dB Gain (max.)
Signal display
Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio
Operating voltage for relays und LEDs
Phantom power
Operating voltage for AD converter
Mains Power Supply
Mains voltage (selectable, see fuse chamber)
Fuse 230 V
Fuse 115 V
Power consumption
8
13.5 dBu (33.5 dBu with PAD)
10 kΩ
75 Ω
15 Hz – 200 kHz
-124 dBu
-94 dBu
-66 dBu
< 78 dB
0.003 %
0.022 %
Green -25 dBu
Yellow 0 dBu
Red +19 dBu (without AD converter)
+12 dBu / -3 dBFs (with AD converter)
+/- 17 V
+18 V
+48 V
+12 V/+3,3 V
230 V AC / 50 Hz; 115 V AC / 60 Hz
T 315 mA
T 630 mA
max. 27 VA