Phantom Power) - Spl P8 Bedienungsanleitung

P8 – Manual
4
Preamps
P8 is equipped with eight preamplifers. These have a discrete
design and are tuned for an open and transparent sound
characteristic.
Gain
The gain control adjusts the preamplifcation. The control
range ranges between +8 und +62 dB.
48V (Phantom Power)
Each of the eight preamplifers has a 48V switch. This switch
activates the required phantom power of 48 volts for the use
of condenser microphones.
PAD
The PAD switch attenuates the signal of the microphone
input by 20 dB, so that even very high levels can be
processed with the P8.
Ø
The phase reverse function reverses the polarity of the signal.
After pressing the switch, the phase is reversed by 180°.
A highpass filter with 6 dB per octave reduces impact noise
below 80 Hz.