Clean The Sieve In The Water Connection - Ronix Rp-0181 Bedienungsanleitung

HIGH-PRESSURE HOSE
The high-pressure hose is specially constructed with reinforced walls it
can be easily damaged and should be stored carefully.
- Do not kink.
- Do not drive vehicles over the hose.
- Do not expose the hose to sharp edges or corners.

CLEAN THE SIEVE IN THE WATER CONNECTION

Remove the coupling from the water connection, and rinse with warm
water to prevent any foreign matter from clogging the pump.
Clean the nozzle with the needle clean out tool provided. Remove the spray
wand from the gun. Remove any dirt from the nozzle hole and rinse.
ATTENTION!
- The sieve must not be damaged.
- Pull the sieve out using flat pliers.
- Clean the sieve under running water.
- Reinsert the sieve into the water connection.
31
User Manual