Water Supply - Ronix Rp-0181 Bedienungsanleitung

9- Plug power supply.
10- Turn on the switch "OFF/ON.
STARTUP
Park the appliance on an even surface.
Insert the mains plug into the socket.

WATER SUPPLY

ATTENTION!
Impurities in the water can damage the high-pressure pump and
the accessories.
- Water supply from mains.
- Drawing in water from the open reservoirs.
- This high-pressure cleaner is suited to work with the suction hose with
a back-flow valve to draw in surface water, e.g. from water butts or ponds.
Fill the suction hose with water.
- Screw the suction hose into the water connection of the appliance and
- insert it into the water source (e.g. rainwater drum).
- Bleed the device as follows prior to operation:
- Turn on the appliance "OFF/ON" switch.
- Unlock the lever of the trigger gun.
- Push the lever of the trigger gun, The device will switch on.
- Let the device run (max. 2 minutes) until the water exits the trigger gun
without bubbles.
- Release the lever of the trigger gun.
25
User Manual