Herunterladen Inhalt Inhalt Diese Seite drucken

Interrupting Operation - Ronix Rp-0181 Bedienungsanleitung

Mit industrie-induktionsmotor
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

RECOMMENDED CLEANING METHOD
- Spray the detergent sparingly on the dry surface and allow it to react,
but not to dry.
- Spray off loosened dirt with the high-pressure met.
AFTER OPERATION WITH DETERGENT
- Remove the hose clean the detergent bottle from the intake and close
it with the lid.
- For storage, put the detergent bottle into the retainer with the cap
pointing up.

INTERRUPTING OPERATION

- Release the lever of the trigger gun.
- Lock the lever of the trigger gun.
- Put the trigger gun with the spray lance into the parking position.
- During longer breaks (more than 5 minutes), also turn the appliance off
using the "OFF/ON" switch.
FINISH OPERATION
- Release the lever of the trigger gun.
- Turn off the appliance " OFF/ON".
- Disconnect the mains plug from the socket.
Only separate the high-pressure hose from the trigger gun or the device
when there is no pressure in the system.
TURN OFF TAP
- Pressure the lever of the trigger gun to release any remaining
pressure in the system.
- Release the lever of the trigger gun.
- Lock the lever of the trigger gun.
ATTENTION!
- When disconnecting the supply or high-pressure hose, warm water
may leak from the connection after the operation.
28
Induction high Pressure Washer
Inhaltsverzeichnis
loading

Inhaltsverzeichnis