Connector Panel - Studer D19 MicVALVE Betriebsanleitung

D19 MicVALVE
1.3.3

Connector Panel

INSERT SENDS
MIC INPUTS LINE INPUTS
f f
L R
[2]
[1] AC POWER
[2] MIC INPUTS
[3] LINE INPUTS
[4] LINE OUTPUTS
[5] AES IN
[6] WCLK IN
[7] WCLK OUT
[8] DIGITAL OUT
[9] INSERT SENDS
E1/4 Come in!
[9] [10]
INSERT RETURNS
m m f
f
L R L
LINE OUTPUTS
f f m
L R L
[3] [4]
Connector for socket IEC 320/C13.
Supply voltage range 100...240 V
quency 50...60 Hz.
For connecting to the mains, please consult the Safety section at the very
beginning of this manual.
Microphone inputs on female XLR connectors. Sensitivity for full-scale
input level of the A/D converter adjustable from –55 dBu to +20 dBu. Input
impedance 1 kΩ, transformer-balanced.
Analog line inputs on female XLR connectors. Sensitivity for full-scale
input level of the A/D converter adjustable from –1 dBu to +24 dBu. Input
impedance 11 kΩ, transformer-balanced.
Analog line outputs on male XLR connectors. Output impedance ≤ 20 Ω,
electronically balanced.
Input for external synchronization via AES/EBU (female XLR connector).
Input for external Word Clock synchronization (BNC connector, 75 Ω).
Output of the Word Clock Sync signal (BNC connector, 75 Ω).
AES/EBU output on male XLR connector, transformer-balanced. Output
impedance 110 Ω.
Output of the insert point, on male XLR connectors. Output impedance
~50 Ω, electronically balanced.
f
R
SYNCHRONIZATION
m f
R AES IN WCLK IN WCLK OUT
[5] [6] [7]
DIGITAL MCH OUT
OPTICAL OUT
DIGITAL MCH OUT
TDIF-1
DIGITAL OUT
m
AES/EBU
[8]
(without voltage selector); mains fre-
AC
Date printed: 9.2.2000
[11]
[1]