Konformitätserklärungen (Declarations Of Conformity); Ce-Konformitätserklärung; Ce Declaration Of Conformity - Studer D19 MicVALVE Betriebsanleitung

Class A Equipment - FCC Notice
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide a
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residen-
CE-Konformitätserklärung
Der Hersteller,
Studer Professional Audio AG,
CH-8105 Regensdorf,
erklärt in eigener Verantwortung, dass das Produkt
Studer D19 MicVALVE, Valve Dignified Mic/Line Pre-
amplifier, (ab Serie-Nr. 101),
auf das sich diese Erklärung bezieht, entsprechend den
Bestimmungen der EU-Richtlinien und Ergänzungen
• Elektromagnetische Verträglichkeit (EMV):
89/336/EWG + 92/31/EWG + 93/68/EWG
• Niederspannung:
73/23/EWG + 93/68/EWG
mit den folgenden Normen und normativen Dokumenten
übereinstimmt:
• Sicherheit:
Schutzklasse 1, EN 60950:1992 + A1/A2:1993
• EMV:
EN 50081-1:1992, EN 50082:1992.
Regensdorf, 6. Februar 1996
B. Hochstrasser, Geschäftsleiter
P. Fiala, Leiter QS
Konformitätserklärungen / Declarations of conformity
tial area is likely to cause harmful interference in which
case the user will be required to correct the interference at
his own expense.
Caution:
Any changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate
the equipment. Also refer to relevant information in this
manual.

CE Declaration of Conformity

The manufacturer,
Studer Professional Audio AG,
CH-8105 Regensdorf,
declares under his sole responsibility that the product
Studer D19 MicVALVE, Valve Dignified Mic/Line Pre-
amplifier, (on from serial No. 101),
to which this declaration relates, according to following
regulations of EU directives and amendments
• Electromagnetic Compatibility (EMC):
89/336/EEC + 92/31/EEC + 93/68/EEC
• Low Voltage (LVD):
73/23/EEC + 93/68/EEC
is in conformity with the following standards or other nor-
mative documents:
• Safety:
Class 1, EN 60950:1992 + A1/A2:1993
• EMC:
EN 50081-1:1992, EN 50082:1992.
Regensdorf, February 6, 1996
B. Hochstrasser, Managing director
P. Fiala, Manager QA
XI