TecTake 405363 Bedienungsanleitung Seite 9

Belt Installation
Installation of 100-150cm
ISOFIX + Adult safety-belt or adult safety-belt only
ISOFIX installation:
ISOFIX connector is optional, you can ignore this step if you
do not want to use it.
IMPORTANT
First please check if there are 2 ISOFIX anchorages in the perpendi-
cular intersection of the vehicle seat back and seat cushion, and the
user-ready tether anchorage behind the vehicle seat.
Tips: The user-ready tether anchorage usually permanently Installed
on the Inner rear luggage shelf or on the vehicle floor. Details you
could read your vehicle guidelines or contact the vehicle manufactu-
rer.
• Press the ISOFIX release button and push the ISOFIX
connectors forward as far as possible.
• Push the ISOFIX connectors directly into
the anchorages until heard an audible sound
"click".
• Grasp the seat body to check the seat if it is fastened
tightly or shakes. If the seat shakes and the ISOFIX con-
nectors are pulled out, please repeat the above steps and
install it again.
- 9 -