TecTake 405363 Bedienungsanleitung Seite 10

WARNING
Do not to use any load bearing contact points other than
those described in the instructions and marked in the child restraint.
The belt must be routed as shown in the instructions.
• Adjust the height of the headrest to suit your
child.
• ISOFIX connector is optional, you can ignore
this step if you do not want to use it.
• Put the shoulder belt through the shoulder.
• Place your child on the car seat and pass the
belts through the red waist belt guide. Fasten
the car belt with an audible sound "click".
• Make sure the Lap belt is stretched as low as possible
over the child's hips , and fastened into the buckle . The
shoulder belt must cross midway between child's shoul-
der and neck.
Care instructions
Removing cover
• Open the cover snap button at the bottom of seat back
as shown right picture.
- 10 -